| Industry Terms |
|
C1S and C2S
Abbreviations for coated one side and coated two sides.
|
|
Calender
To make the surface of paper smooth by pressing it between rollers during manufacturing.
|
|
Caliper
(1) Thickness of paper or other substrate expressed in thousandths of an inch (mils or points), pages per inch (ppi), thousandths of a millimeter (microns) or pages per centimeter (ppc).
|
|
Camera-ready Copy
Mechanicals, photographs and art fully prepared for reproduction according to the technical requirements of the printing process being used. Also called finished art and reproduction cop
|
|
Camera Service
Business using a process camera to make photostats, halftones, plates and other elements for printing. Also called prep service and trade camera service
|
|
Carbonless Paper
Paper coated with chemicals that enable transfer of images from one sheet to another with pressure from writing or typing.
|
|
Carload
Selling unit of paper that may weigh anywhere from 20,000 to 100,000 pounds (9,090 to 45, 454 kilos), depending on which mill or merchant uses the term. Abbreviated C
|
|
Carton
Selling unit of paper weighing approximately 150 pounds (60 kilos). A carton can contain anywhere from 500 to 5,000 sheets, depending on the size of sheets and their basis weight.
|
|
Case
Covers and spine that, as a unit, enclose the pages of a case-bound book.
|
|
Case Bind
To bind using glue to hold signatures to a case made of binder board covered with fabric, plastic or leather. Also called cloth bind, edition bind, hard bind and hard cover.
|
|
Cast-coated Paper
High gloss, coated paper made by pressing the paper against a polished, hot, metal drum while the coating is still wet.
|
|
Catalog Paper
Coated paper rated #4 or #5 with basis weight from 35# to 50# (50 to 75 gsm) commonly used for catalogs and magazines.
|
|
Chain Dot
(1) Alternate term for elliptical dot, so called because midtone dots touch at two points, so look like links in a chain.
|
|
Chain Lines
(1) Widely spaced lines in laid paper.
|
|
Chalking
Deterioration of a printed image caused by ink that absorbs into paper too fast or has long exposure to sun, and wind making printed images look dusty. Also called crocking
|
|
Check Copy
(1) Production copy of a publication verified by the customer as printed, finished and bound correctly.
|
|
Choke
Technique of slightly reducing the size of an image to create a hairline trap or to outline. Also called shrink and skinny.
|
|
Chrome
Strength of a color as compared to how close it seems to neutral gray. Also called depth, intensity, purity and saturation.
|
|
Close Up
A mark used to indicate closing space between characters or words. Usually used in proofing stages
|
|
CMYK
Abbreviation for cyan, magenta, yellow and key (black), the four process colors.
|
|
Coarse Screen
Halftone screen with ruling of 65, 85 or 100 lines per inch (26, 34 or 40 lines centimeter).
|
|
Coated Paper
Paper with a coating of clay and other substances that improves reflectivity and ink holdout. Mills produce coated paper in the four major categories cast, gloss, dull and matte
|
|
Collate
To organize printed matter in a specific order as requested.
|
|
Collating Marks
Mostly in the book arena, specific marks on the back of signatures indicating exact position in the collating stage.
|
|
Color Balance
Refers to amounts of process colors that simulate the colors of the original scene or photograph.
|
|
Color Blanks
Press sheets printed with photos or illustrations, but without type. Also called shells.
|
|
Color Break
In multicolor printing, the point, line or space at which one ink color stops and another begins. Also called break for color.
|
|
Color Cast
Unwanted color affecting an entire image or portion of an image.
|
|
Color Control Bar
Strip of small blocks of color on a proof or press sheet to help evaluate features such as density and dot gain. Also called color bar, color guide and standard offset color bar.
|
|
Color Correct
To adjust the relationship among the process colors to achieve desirable colors.
|
|
Color Curves
Instructions in computer software that allow users to change or correct colors. Also called HLS and HVS tables
|
|
Color Electronic Prepress System
Computer, scanner, printer and other hardware and software designed for image assembly, color correction, retouching and output onto proofing materials, film or printing plates. Abbreviated CEPS.
|
|
Color Gamut
The entire range of hues possible to reproduce using a specific device, such as a computer screen, or system, such as four-color process printing.
|
|
Color Key
Brand name for an overlay color proof. Sometimes used as a generic term for any overlay color proof.
|
|
Color Model
Way of categorizing and describing the infinite array of colors found in nature
|
|
Color Separation
(1) Technique of using a camera, scanner or computer to divide continuous-tone color images into four halftone negatives.
|
|
Color Sequence
Order in which inks are printed. Also called laydown sequence and rotation
|
|
Color Shift
Change in image color resulting from changes in register, ink densities or dot gain during four-color process printing.
|
|
Color Transparency
Film (transparent) used as art to perform color separations.
|
|
Comb Bind
To bind by inserting the teeth of a flexible plastic comb through holes punched along the edge of a stack of paper. Also called plastic bind and GBC bind (a brand name).
|
|
Commercial Printer
Printer producing a wide range of products such as announcements, brochures, posters, booklets, stationery, business forms, books and magazines. Also called job printer because each job is different.
|
|
Complementary Flat(s)
The second or additional flat(s) used when making composite film or for two or more burns on one printing plate.
|
|
Composite Art
Mechanical on which copy for reproduction in all colors appears on only one surface, not separated onto overlays. Composite art has a tissue overlay with instructions that indicate color breaks
|
|
Composite Film
Film made by combining images from two or more pieces of working film onto one film for making one plate.
|
|
Composite Proof
Proof of color separations in position with graphics and type. Also called final proof, imposition proof and stripping proof
|
|
Composition
(1) In typography, the assembly of typographic elements, such as words and paragraphs, into pages ready for printing.
|
|
Comprehensive Dummy
Simulation of a printed piece complete with type, graphics and colors. Also called color comprehensive and comp
|
|
Condition
To keep paper in the pressroom for a few hours or days before printing so that its moisture level and temperature equal that in the pressroom. Also called cure, mature and season.
|
|
Contact Platemaker
Device with lights, timing mechanism and vacuum frame used to make contact prints, duplicate film, proofs and plates. Also called platemaker and vacuum frame.
|
|
Continuous-tone Copy
All photographs and those illustrations having a range of shades not made up of dots, as compared to line copy or halftones. Abbreviated contone.
|
|
Contrast
The degree of tones in an image ranging from highlight to shadow.
|
|
Converter
Business that makes products such as boxes, bags, envelopes and displays.
|
|
Copyboard
Surface or frame on a process camera that holds copy in position to be photographed.
|
|
Cover
Thick paper that protects a publication and advertises its title. Parts of covers are often described as follows: Cover 1=outside front; Cover 2=inside front; Cover 3=inside back, Cover 4=outside back.
|
|
Coverage
Extent to which ink covers the surface of a substrate. Ink coverage is usually expressed as light, medium or heavy.
|
|
Cover Paper
Category of thick paper used for products such as posters, menus, folders and covers of paperback books.
|
|
Crash
Coarse cloth embedded in the glue along the spine of a book to increase strength of binding. Also called gauze, mull and scrim.
|
|
Creep
Phenomenon of middle pages of a folded signature extending slightly beyond outside pages. Also called feathering, outpush, push out and thrust. See also Shingling.
|
|
Crop Marks
Lines near the edges of an image indicating portions to be reproduced. Also called cut marks and tic marks.
|
|
Crossover
Type or art that continues from one page of a book or magazine across the gutter to the opposite page. Also called bridge, gutter bleed and gutter jump.
|
|
Cure
To dry inks, varnishes or other coatings after printing to ensure good adhesion and prevent setoff.
|
|
Customer Service Representative
Employee of a printer, service bureau, separator or other business who coordinates projects and keeps customers informed. Abbreviated CSR
|
|
Cutoff
Circumference of the impression cylinder of a web press, therefore also the length of the printed sheet that the press cuts from the roll of paper.
|
|
Cut Sizes
Paper sizes used with office machines and small presses.
|
|
Cutting Machine
A machine that cuts stacks of paper to desired sizes. The machine can also be used in scoring or creasing
|
|
Cutting Die
Usually a custom ordered item to trim specific and unusual sized printing projects.
|
|
CWT
Abbreviation for hundredweight using the Roman numeral C=100.
|
|
Cyan
One of the four process colors. Also known as process blue.
|